Shenzhen Tiancheng Lighting Limited company to welcome you！ National Service Hotline：4008-320-328
| What is 5050 lamp beads |
| Time:2022-10-09 00:00:00 | view： |
|
LED505012V60 light lamp with one meter is 14.4W. The 5050fpc light belt, this LED lighting angle is relatively large. And each power theoretical value is 0.2W. The illumination value is 16-22LM. How long is the specific, depending on the spacing! The common distance is 33mm, the power per meter is 7.2W, 30 pieces, and the voltage is 12V. 5050 lamp beads. With 0.24, it is its one -meter power. such as one meter 60 lamp beads, 60*0.24 \u003d 14.4W.1. Product model: 5050 fantasy lamp bars 2. Light source: SMD5050LED 3, board: FPCB 4, chip: San'an Optoelectronics 5, IC model: 1903, 16703 , SK6812, TM1914 6, gray level: 256 level 7, LED quantity: 30 lights/meters, 48 \u200b\u200blights/meters, 60 lights/meters, 72 lights/meters, 90 lights/meters, 96 lights/m , 144 lights/meters, 180 lights/meters 8, light emitting angle: 120 ° 9, luminous color: can be adjusted into different colors and different effects by controller 10. Standard working voltage: DC5V/12V/24V 12. Waterproof level: waterproof, glue dripping, waterproof, waterproof, waterproof waterproof 13, FPCB board size: width: 10mm, thickness: 3mm 14, FPCB color: black, white 15 Our company can provide supporting fantasy controller and power supply Main features: 1. Control principle: an IC controls a LED to form a circuit (a group), the controller controls the circuit in the FPCB by controlling the IC. , So as to control the different effects of the LED lamp bar changes; such as flashing, chasing, jumping, clockwise running horse, running back in time, monochrome running, changing color horses, single chase from beginning to end, flowing water, simulated lightning, etc. This lamp; this lamp; The change effect of the strip is not limited to the 94 effects of the current controller, which can be written by yourself according to the needs of the customer; the form of the schedule can be displayed, text, letters, pictures, animations, and so on. 2. Environmental protection and safety: Use high -quality high -brightly highlight SMD5050LED. It has the characteristics of small power consumption, small calories, no glare, impact resistance. Low -voltage DC 5 volt power supply, high safety and reliability. 3, rich colors and diverse can be adjusted according to the customer's needs. 4, long life: average life expectancy of 50,000 hours. 5. Tailoring and welding are convenient and free: Each set of LEDs can form a circuit, which can be cut and welded along the above line to achieve the requirements of various lamp length required by the customer. 6. Soft: Use soft FPCB boards as substrates, which can be connected at will, bending, cutting and arbitrarily fixed on the surface of the uneven. 7, light, thin: suitable for installation in a narrow space. Scope of use: 1. Polygonal walls and water droplets in hotels/KTV and other places, set up decorative atmosphere; 2. Building, advertising walls, signboards, festivals and other decoration areas Effect; 3. Home decoration lighting (staircase, door frame, bar, wine cabinet, wardrobe, TV cabinet, DIY home decoration ...); 4, car beauty (car body, bottom of the car ...); The outlines of the iconic building building pavilions, bridges, parks and other outlines are decorated with brightening effects.6. Lighting signals (such as various lighting indicators) 7, Edge-Lighting transparent or diffused materials 8. Support underwater lighting engineering 9. Paradise/theater cockpit lighting Installation method: 1, indoor installation: LED light bands for indoor installation is relatively simple, because it does not need to withstand wind and rain. When installing, you can directly tear off the sticker on the back of the 3M double -sided glue surface on the back of the light bar, and then fix the light bar in the place where you need to install. If the corner or the light strip is too long and short, the LED light band can be cut or welded alone at each set of scissors logo. 2. Outdoor installation: Outdoor installation will be fixed with 3M glue because of the wind and rain. Therefore, the card slot fixing is often used for outdoor installation. The method of cutting and connecting is required. The method is the same as the indoor installation. In addition, it is equipped with waterproof glue to consolidate the waterproof effect of the connection point. 3, the power supply connection method: the general voltage of the LED phantom lamp belt is the DC5V, so the power supply is required. The length is fixed. 4. Controller connection method: LED horse -raid lamp belt and RGB full -color lamp belt need to use the controller to achieve the changing effect, and the control distance of each controller is different. Generally speaking 10 to 15 meters, the control distance of the remote controller is 15 to 20 meters, and the maximum can be controlled to 30 meters. If the connection distance of the LED light band is long and the controller cannot control such a long lamp band, then the power amplifier is needed to be used for distribution. |
